OSHA 10 Hour Safety Course

OSHA 10 Hour Safety Course–The Minimum Safety Training Required for a Construction Worker

2011-01-25T00:13:00.000-08:00

As of today, there are about 7 separate states in the United States that have made it compulsory for construction workers to complete an OSHA 10 hour safety course in order to get started with work. This law was passed in September 2009 and is still going on strong.

According to OSHA, employers in the construction industry are considered to be responsible for providing all their employees with the necessary safety trainings so as to avoid unsafe working conditions that they may have to deal with at work.

The OSHA 10 hour safety training courses cover a variety of topics that range from the Introduction to OSHA, General Safety & Health Provisions, Fall Protection, Electrical, Personal Protective Equipment, Hand & Power Tools, Materials Handling, Storage and Disposal, etc. In order to receive a certification for the OSHA 10 Hour Safety Course, all workers should first pass the quizzes and final examination.

Connecticut, New York, Nevada, Massachusetts, Missouri, Rhode Island and New Hampshire are the 7 states that require workers to be OSHA 10 hour certified in order to work on public construction projects.

It is important to note that the OSHA safety trainings were all initially designed to be voluntary trainings, however, with the increase in the number of work related deaths and injuries, many states have made these trainings compulsory.

Safety Facts Regulated by OSHA

2010-12-20T02:06:00.000-08:00

The Occupational Safety and Health Administration plays a very important role in maintaining the overall health and well-being of laborers. The safety facts sketched out by this agency have to be considered closely by the employers in order to maintain a safe working environment for workers. OSHA 10 hour training courses teach the employers as well as the employees the importance of regulating safe work practices.

Falls are considered to be one of the leading causes of occupational fatalities. In fact, they constitute for around eight percent of the overall work-related deaths that occur from trauma. According to OSHA, whenever an employee is working at a height of four feet and more than that, they are at a risk of falling. Therefore, the proper Personal Protective and Fall Protection Equipments should be used.

According to a study carried out in the year 2007, explosions and fires accounted for nearly three percent of the total overall deaths. Fire hazards like defective wires should be eliminated to decrease the chances of explosions occurring.

The hazardous chemicals present at workplaces should not be ignored. The hazard communication standard laid down by OSHA should be followed by employers to minimize the uncontrolled exposure to hazardous substances.

OSHA Safety Training Courses- An In Depth Analysis

2010-12-08T21:50:00.000-08:00

Firstly, let's start of by saying that, everybody knows the importance of safety training courses. Unfortunately, most of these training courses are time consuming and ineffective. Thus, every OSHA course has been designed and developed by experts, in order to impart a sense of understanding and knowledge,that is practical. But more importantly, these courses are a 100% online and hence, they can be completed anywhere and at anytime. In other words, these courses do not disrupt the daily schedules and routines of the employees and workers, rather they are cost effective and informative as well as very practical.

OSHA or the Occupational Safety and Health Administration, is a regulatory body, that monitors organizations and carries out surprise investigations, in order to make sure that every company complies with the safety standards and regulations.

There are mainly, three different types of OSHA Safety Training courses. They are:

1.The 40 hour OSHA safety training course;

2.The 24 hour OSHA safety training course and

3.The 8 hour annual OSHA refresher safety training course.

Whats even better is that these training courses are included with several interesting learning activities, that not only help trainees enhance their memory, but it also helps them to memorize and remember the important subjects. This can be accomplished, for every chapter is inculcated with a series of quizzes. Also, every course ends with a final exam. Hence, here to there is a sense of flexibility, for every student gets three chances to clear the final exam.

Furthermore, these safety courses are primarily for workers and employees who handle hazardous substances and materials on a daily or limited basis. Thus, every OSHA Safety training course, seeks to impart a sense of skill, knowledge and awareness among its trainees and students. But these courses truly stand apart, for they are constantly updated and in tune with the safety and health standards and regulations, that's set up by OSHA.

Moreover, these safety training courses are self pace training courses that prove to be easy, convenient and vital. In other words, every trainee/student can attend, learn and complete the course at their own pace.

Each and every course is vital, for they touch upon several important topics,such as:

1. Analyze safety and hazards

2.Overview of the regulations

3.Toxicology

4.Hazard identification

5.Site Characterization

6.Medical surveillance

7.Radioactive hazards

We can most definitely end this in depth analysis, by saying that the OSHA safety training courses are extremely flexible. Yet, somehow, they tend to maintain their quality, by imparting information that is practical as well as effective and innovative.

For further details contact: http://www.osha10hoursafetycourse.com/

Different Types of Fall Protection Equipment

2010-11-26T00:05:00.000-08:00

Employers of various constructions sites are primarily concerned about fall injuries, for they are responsible for a large number of fatalities. However, OSHA has established a number of threshold heights, where various types of fall protection equipment are required. For workers and employees in the general industry, the basic height is 4 feet above a lower level. But, at a construction site, the threshold height is 6 feet, above a lower level.

They key to protecting workers and employees, in these dangerous situations is to employ the right type of protection systems and personal protective equipments. Some of them have been mentioned in the list below:

1.Ladders: Firstly, fall protection is not required for portable ladder use in either the construction or the general industries. But fixed ladders have a different story, for they may not always have ladder safety devices or cages.

2.Handrails and Guardrails: These are horizontal or vertical barriers, normally consisting of an assembly of mid rails, top rails and posts to prevent workers from falling or slipping to lower levels.

3.Scissor lifts: These are considered by OSHA to be a form of scaffolding. Hence, fall protection requirements for scaffolding apply to any form of work that takes place 10 feet above a lower level.

4.Safety nets: This is another type of fall protection equipment that is used to eliminate fall hazards. Hence, these nets need to be placed close to the area where employees are working.

5.Harnesses: These are fall protection systems. These systems consist of three parts, an anchor point, a body harness and a life line. They basically prevent workers from falling more than 6 feet.

Effective Strategies to Improve Worker Safety Attitudes

2010-11-15T01:44:00.000-08:00

It is important and necessary to develop and maintain a good safety attitude in workplaces. If you build your work culture based on this foundation, you will minimize occupational hazards, prevent accidents and create a safer and healthier workplace.

It is a big challenge to embed a positive attitude that workers have towards their work. So what steps can you take to improve the workplace safety attitudes? Check out the following points:

Encourage safety suggestion: Executing a safe workplace requires the involvement of both employers and employees. Workers know their jobs better than anyone and they can have the best ideas to improve the work condition. You must encourage their suggestion while making the improvement progress.

Act fast to correct hazards and improve work safety conditions: Whenever there is any hazard identified or employees bring any hazard to your attention, act promptly to correct the situation. If you ignore the situation, your employees will follow the same attitude.

Provide OSHA training: The OSHA safety training courses are a great way to instill a positive attitude in workers towards their work. When workers have the knowledge, skills and understanding they require for their work, they will have a strong confidence within themselves to work safely and avoid accidents. An employee trained under OSHA training course will quickly develop a good safety attitude and make safety a priority.

Three Reasons why Employees should undertake Health and Safety Programs

2010-10-11T22:43:00.000-07:00

OSHA 10 hour training courses offer Health and Safety Programs. There has been a substantial rise in the number of accidents and injuries at work places. This is what makes it extremely important to have a safety plan in place. Employees should take the liberty to acknowledge themselves with the health and safety rules as they are laid down by OSHA. The above mentioned courses teach all that is required to know the ways of creating a safe work environment.

There are many reasons why such safety programs should be undertaken. However, listed below are the top three reasons for the same.

1.Reduce the chances of injuries and deaths of employees: This is the most important reason of conducting an occupational health and safety program. Any one of the OSHA 10 hour training courses can be adopted to educate all the workers on workplace related hazards. By undertaking such programs, employers can protect themselves and their employees from various injuries, illnesses and deaths. There are many types of work place hazards. Some of the most common amongst these are slippery floors, getting hurt due to sharp objects and falling or lifting up of heavy objects. Work place hazards may sometimes also include medical and fire emergencies. One thing should always be kept in mind. If the preparation is properly done, the outcome would, undoubtedly, be better.

2.Avoid being fined and penalized by OSHA: This is also one of the important reasons to take up these safety training programs. Employers can learn how to avoid OSHA fines by knowing just some of the basic ground rules. This will help them know how to take the necessary precautions. OSHA does not propose any penalty if the employer is cited for something that has a low probability of causing a possible injury or illness. The violation would, in any case, have to be corrected. However, if the cited violation has a greater probability of resulting into an injury or illness, a base fine of $1,000 is used. Also, appropriate adjustment factors are applied to the penalty. In the extreme cases of serious violations, penalties can be anything between the range of $1,500 to $7,000. Such violations have the probability of causing death too. OSHA 10 hour training courses teach employers how to avoid such heavy penalties by enforcing the correct safety plan.

3.Management of a health and safety plan: OSHA has laid down innumerable rules, procedures and regulations for the safety and well being of employees. It gets very difficult to understand and remember all these rules. By undertaking Health and Safety programs, employers can design their own safety plan that includes all the basic measures and precautions. If you have your own company, it is a win-win situation for all; the employer, the employees and the company.

For further information, visit: http://www.osha10hoursafetycourse.com

The Importance of OSHA 10 Hour Construction Courses

2010-10-07T01:56:00.000-07:00

Getting an OSHA 10 Hour certification can help you protect the life and the health of your workers. This course will provide you as well as your workers with the much needed skills, knowledge, information and technicalities to remain safe and healthy at the work site. There are 2 basic OSHA 10 Hour courses, namely: the OSHA 10 Hour Construction Course, and the OSHA 10 Hour General Industry Course. Each of these courses deal with all the necessary safety and health issues within the construction and general industry respectively.

Apart from the major government agencies, there are many private agencies that also provide these courses, and do so at just the same levels of high quality, efficiency and affordability. The private courses provide the same contents that the government agencies provide, and they comply with all the OSHA standards. These courses have been designed to educate workers about all the health and safety issues at the workplace.

The OSHA 10 Hour Construction Course aims to help workers, job supervisors, foremen, and anyone involved in the construction industry. The construction industry holds risks at every single stage, and it accounts for the highest number of worker deaths and casualties each year. In an attempt to curb these estimates, OSHA came up with a number of safety training courses, OSHA 10 Hour Safety Courses included, that aim to educate workers about the hazards and risks that they may encounter at work, and how to deal with these risks, minimize them, or eliminate them altogether.

Getting your workers OSHA 10 hour certified will make help them greatly, and make it very convenient for you. Your workers won't have to take a few days leave to attend the courses, as these courses are online courses and can be completed at their own pace and time. Through these courses, your workers will get all the important updates about their industry and jobs. This is why taking these courses, and encouraging your workers to take these courses is very important.

How do Slips, Trips & Falls take place at the Workplace

2010-09-17T01:09:00.000-07:00

Slips, Trips and falls are commonplace incidents at most workplaces. But what are the main causes for them to occur? Anything from slippery surfaces to hoses lying carelessly across a path and even failure to wear head protection could cause a really painful fall. However, the causes could be both – behavioral or conditional.

As far as behavioral safety is concerned, it is important to have your eyes on the path before you at all times. Many times, you could come across slippery or uneven paths, and can avoid falling if you only watch where you are going. Most people think that is obvious, as it takes just a bit of common sense. But, in most fall cases, the cause has been that the person concerned was not watching where he was going.

The shoes that you wear can also help prevent falls. The soles and the type of heels should first be evaluated before buying. In many fall cases, the primary cause was found to be inappropriate footwear.

Another cause for slippery surfaces in when people drop coffee or any liquid substance and don't clean it up. Slippery surfaces like oil leaks and spilled liquids should be cleaned immediately and other events such as oil leaks should be tended to immediately as well. Uneven surfaces are another major cause for injury.

Hoses and other objects lying carelessly across paths are a potential hazard. Use cord protectors and overhead hoses to reduce these dangers.

OSHA requires the use of fall protection devices at the workplace for those workers who work six feet above the ground. Employees should be trained in the use of this equipment.

Being prepared for these harads could drastically reduce any fall, slip, or trip injuries at the workplace.

Why Fall Protection Safety Training is Necessary

2010-08-23T01:03:00.000-07:00

Falls from heights are a serious occupational safety challenge that most workers face everyday. A majority of the falls happen from roofs and ladders. It has been listed as one of the leading causes of traumatic work related death and it accounts to 8% of all occupational fatalities.

Falls are such dangerous occupational hazards because you cannot recognize the danger beforehand, unlike other work hazards. It is the most frequent cause of fatalities, especially in the construction industry, and accounts for one of every three deaths in the industry.

To identify fall hazards and to decide what measures will be best to protect workers is vital for reducing or eliminating fall hazards. This can be achieved only through proper training.

OSHA has mandated the protection of workers and the agency has set up the Fall Protection Standard 29 CFR 1026 which the workers have to comply with.

The fall protection programs are provided under the OSHA safety training provided by many safety training schools. This OSHA compliance training program is provided as a guide to assist workers in complying with the requirements of the fall protection standards and to provide them with the information when they are off the ground.

Every worker who is exposed or likely to be involved in fall hazards at the workplace must attain the fall protection training to reduce these hazards.

Asbestos and OSHA

2010-07-21T04:48:00.000-07:00

About 1.3 million employees are exposed to significant asbestos hazards in the construction and general industry. A lot more exposure occurs in the construction industry, where workers are more likely to be exposed during the removal of asbestos or manufacture of asbestos products.

The hazards of asbestos have increased the chances of workers getting cancer. The disease does not develop immediately but appears after a number of years

With such great levels of risk, the Occupational Safety and Health Administration has now issued revised regulations that cover asbestos exposure in the construction and general industry. The maximum exposure limit is set in both standards. It also includes the provisions of engineering controls and respirators, exposure monitoring, protective clothing, warning signs, labeling, hygiene facilities and practices, record keeping and medical exams.

It is also the responsibility of the employers to provide their employees with a training program to help them avoid the hazards from asbestos exposure. OSHA has special training courses for asbestos hazards. There are many providers of OSHA training programs on the construction and general industry asbestos standards. You can check these out online as well. Being trained in this program will help you be aware of the asbestos hazards.

Make your OSHA course interesting by online safety course enrollment

2010-05-05T23:49:00.000-07:00

Classroom training are boring and time taking and also less interactive. But online OSHA safety training are interesting and interactive that can sure help you getting the best skills to save the workers at the working site. That is the main reason behind the increasing demand of the online OSHA safety training courses. There are so many advantages of online courses besides these also.

Online OSHA safety training courses offer the opportunity to log in and out whenever the trainees want and also from anywhere. The trainees can complete OSHA safety training at a straight or take break during the training according to the trainees convenience. So, this is best to get enrolled into online OSHA safety courses. Being online, these courses are daily updated and the trainees will get all the current information about OSHA new regulations and all.

There are many online OSHA safety training providers are there that strive to understand and satisfy their clients by offering the best services because they are also professional like the industrialists. To select the best among them needs some kind minute observations like: how long they have been working, how many are getting there courses, how effective their courses are, whether they are reviewed and accepted by OSHA or not and many more. Once you find out the best courses, you sure will be happy to get the most interactive and effective OSHA safety training courses online. Some websites like: http://osha10hoursafetycourse.com offers such courses that really can give you to the safest working employers and sites.

Importance of OSHA 10 hour safety course

2010-04-06T04:27:00.000-07:00

The OSHA 10 hour safety course helps the workers in understanding the basic rules and regulations of occupational safety and health. This course has been recommended by OSHA as the orientation to occupational safety and health for the workers covered by OSHA 29 CFR 1926. The first point to eliminate the hazards in the work place is to know or to identify the reasons behind it. OSHA 10 hour course aims at reducing the risk of general and construction industries workers at working place. The experts of OSHA 10 hour safety course suggests the workers the practical skills to reduce, and eliminate hazards and keep themselves safe from hazardous conditions.
There are two types of OSHA 10 hour safety course:

1. OSHA 10 hour general industry safety course
2. OSHA 10 hour construction industry safety course

These courses help the employees to understand the basic safety measures while working and about the regulations of OSHA that standards for their safety only. Employees become alert and aware of their safety and healthy working environment once they get the courses. OSHA is successful in reducing the rate of accidents, injuries, illness, fatalities, death and other health and property of the workers.

OSHA 10 hour course has great importance in making an employee friendly environment where there is no risk of life. Employees of construction and general industries have come to know about the legal aid they need at work place and compensation for their loss. These courses teach the employees about the functions of OSHA Act. The courses teach the workers about the rights and responsibilities of the employers and employees, requirements for special purpose equipments and all other OSHA requirements.

In the real sense, the OSHA 10 hour course has significant importance in developing the workplace situations and also in safety and health measure of the worker.

Why Taking OSHA 10 Hour Course is Important

2009-12-14T03:50:00.000-08:00

Employer is always obliged to make sure that the workplace is safe for the employees and also to ensure that the risk of accidents is kept to minimum. He must also have the overall safety program. OSHA 10 Hour training a part of Occupational Safety and Health Administration’s plan to provide a safe work environment and also maintain thereafter. There are some states require that all the employees should have a minimum of 10 hours of safety training to work in a public construction site.

What are the states that require OSHA 10 hour course training?

OSHA training is required by the law in the States of Connecticut, Missouri, New Hampshire, Navada, Massachusetts, Rhode Island and New York. It is considered to be considered to be illegal to work on any public construction site without being OSHA10 hour construction course certified.

Who can get certified for OSHA 10 hour course?

Anybody who lives in the states mentioned above should get certified if they plan to work in a construction field. Some business may require that their workers to take OSHA 10 hour course to keep their employees safe and avoid the OSHA’s hefty non-compliance penalties. There are no pre-requisite for these training courses. Anybody who wants to raise awareness of workplace injury prevention or work related hazard is encouraged to take the course.

Where can you get certified?

There are two ways to get certified, one is online certification and the other is onsite. Online certification is the great for the individuals and small business because it allows the individual to work at their own pace and in their own place. However, onsite training allows for a single instructor to train a large group of people.